Skip to content
Dallas Makerspace DMS Source

Excalibur Scroll Saw

Excalibur 120-Volt 21 in. Tilting Head Scroll Saw with Stand and Foot Switch EX-21K - The Home Depot

The user will need to supply the 5” unpinned saw blades (similar to this).

General guidelines for choosing blades:

  • Wide, thick blades with course teeth are better suited to cutting straight lines and will not cut tight corners.
  • Narrower, thinner blades with finer teeth will cut more slowly, but will turn much tighter corners for very intricate work.
  • Consider material thickness when selecting blades. Ensure that a minimum of two or three teeth are in contact with the workpiece at all times. For example, when cutting 1/8” thick material, use a blade with a minimum of 16-20 teeth per inch.
Name

Excalibur EX-21 Scroll Saw
Date Acquired


Training

Training Required
Manufacturer


Description


Volunteers


Manual

Scroll-Saw-Set-Up-and-Op…
Section titled “Related Pages”

Migrated from the DMS Confluence: original page