3D Scanner - RevoPoint Pop

Danger

This article is under construction. Please edit the page or comment with any questions or concerns.

Manuals and Downloads

• Main support page: https://www.revopoint3d.com/support/supportpop/
• HandyScan and HandyStudio direct link (may break): https://www.revopoint3d.com/download/pop/
• Manual direct link: https://www.revopoint3d.com/wp-content/uploads/download/POP%203D%20Scanner%20_User_Manual%20V.2.1.9.pdf

Scanner Rules

1. Beware the Class 1 IR laser. Don’t shine directly into eyes. Instruct face-scanning subjects to close eyes during scanning.
2. Don’t drop the scanner!
3. Don’t cross-thread the 1/4” tripod mount. Always turn the screw in reverse until the threads engage.
4. Be careful when inserting the delicate USB connectors. Don’t cross-thread the USB connector lugs - always turn the screw in reverse until the threads engage.
5. When finished, pack the scanner neatly into its protective orange case.
6. Protect the scanner and turntable from powders, foods, residues, etc.
7. Training is NOT required to use the scanner. Online, self-service training is in-development. Please contact Evan Lott if you’d like to help write the Moodle course.
8. Immediate report any damage, theft, missing pieces, or other issues to the 3D Fab chairperson, a board member, or an officer.

Software Setup and Tour

1. (optional) Use the support link above to download the latest version of the HandyScan and HandyStudio software (bundled together). The software is free and requires no licensing.
2. If using a Makerspace computer, HandyScan and HandyStudio will be preinstalled on select computers.

Scanner Setup
Scannable and un-scannable objects

Special notes about scanning on DMS computers

Name	3D Scanner - RevoPoint Pop
Date Acquired	18 Oct 2021
Training	Training Required
Manufacturer	RevoPoint
Description	Structured light IR 3D scanner with turntable.
Volunteers	Evan Lott

Related Pages