Powermatic 1285
Powermatic Model 1285
A jointer is used to true a face of a board. A jointer alone cannot be used to make a board of even thickness. For this task, a thickness planer is used. Training is required in order to use this machine. NO ENDGRAIN ON THIS MACHINE.
Manufacturer’s Specifications
Section titled “Manufacturer’s Specifications”| Powermatic Model 1285 12” Jointer | |
| Number of Knives | 44 |
| Standard Knife Size (L x W x T) (In.) | 30 x 12 x 2 |
| Cutterhead Speed (RPM) | 5,000 |
| Cutting Capacity (W x D) (In.) | 11-3/4 x 3/4 |
| Table Size (L x W) (In.) | 84 x 12 |
| Table Height from Floor (In.) | 31-1/2 |
| Fence Size (L x H) (In.) | 47 x 5-1/2 |
| Fence Tilt (Deg.) | 45 Forward, 45 Backward |
| Fence Positive Stops (Deg.) | 45, 90, -45 |
| Dust Collection Minimum CFM Required (CFM) | 800 |
| Dust Port Outside Diameter (In.) | 6 |
| Motor Power (HP) | 3 |
| Motor Phase | 1 |
| Motor Voltage (V.) | 230 |
The OEM manual can be found here: http://content.powermatic.com/assets/manuals/1791241_man_EN.pdf
Materials
Section titled “Materials”Only wood may be used with the machine. NO ENDGRAIN ON THIS MACHINE.
Training
Section titled “Training”Training is required to use this tool.
Migrated from the legacy DMS wiki: original page