Metal shop tools
Tools occupying space under the Metal_Shop_Committee.
Joining
Section titled “Joining”Welders
Section titled “Welders”See the welding page.
Riveting
Section titled “Riveting”N/A
Cutting
Section titled “Cutting”Plasma
Section titled “Plasma”Thermal Dynamics Cutmaster 42 - handheld
Section titled “Thermal Dynamics Cutmaster 42 - handheld”Manual: Located in the committee drive in metalworking/manuals
Setup video
Thermal Dynamics Cutmaster 42
Specifications
| Performance | Specification |
| Torch Model | SL40 |
| Recommended Cut - Inches (mm) | 1/4” (6) |
| Max Cut - Inches (mm) | 5/8” (15) |
| Piercing Rating - Inches (mm) | 1/4” (6) |
| Rated Output | 40 Amps |
| Amperage Draw | 29A @ 120 V, 15A @ 230V |
| Input Voltage - (Volts, Phase, Hz) | 120/230V, 1, 50/60 |
| Max Amperage Output - (Amps) | 27 @ 120V, 40 @ 230V |
| Duty Cycle (@40 degrees C) | 40% @ 40A |
| Air Pressure - psi (bar) | 75 (5.2) |
| Flow - Cfm (l/m) | 3.2 (91) |
Consumables
| Picture | Description | Item number |
|---|---|---|
 |
Torch |
7-0040 |
Dynatorch SuperB CNC
Section titled “Dynatorch SuperB CNC”-
Dynatorch SuperB
Miller Spectrum 300 - handheld (DEPRECATED)
Section titled “Miller Spectrum 300 - handheld (DEPRECATED)”Manual: Spectrum 300
Tips from Miller’s web site: Optimize Plasma Cutter Performance
Consumables
| Description | Part No. |
| Electrode | 176655 |
| Tip | 176656 |
| Swirl Ring | 176657 |
| Retaining Cap | 202808 |
-
Baileigh SF-5216E
Handheld shears
Section titled “Handheld shears”insert info
Bandsaw
Section titled “Bandsaw”-
Wellsaw Model 8 with 138” blade
Jigsaw
Section titled “Jigsaw”Black & Decker JS660
Manual: JS660
Corner Notcher
Section titled “Corner Notcher”-
Corner Notcher
Model: UnknownManual: UnknownAs far as I know, it is currently stored behind the bandsaw in Machine shop, fits in the arbor press.Material Removal
Section titled “Material Removal”Sanding
Section titled “Sanding”Wet Blasting Cabinet
Section titled “Wet Blasting Cabinet”Vapor Honing Technologies VH-800P
SpecificationsManufacturer's videoHow-to videoChanging Abrasive videoDimensions:Hammond Abrasive Belt Grinder-Polisher
Section titled “Hammond Abrasive Belt Grinder-Polisher”Model 50-ED Serial 1137
unknown model Disk Sander
Section titled “unknown model Disk Sander”Grinding
Section titled “Grinding”Skil 3380 (Reserved for Tungsten electrodes)
Section titled “Skil 3380 (Reserved for Tungsten electrodes)”
add models/intended use of grinders here
Section titled “add models/intended use of grinders here”Shaping Equipment
Section titled “Shaping Equipment”Magnetic Box & Pan
Section titled “Magnetic Box & Pan”-
Baileigh Magnetic Brake
Press Brake
Section titled “Press Brake”
Model: SWAG Offroad (?)
Manual: Unknown
As far as I know, it fits in the arbor press.
English Wheel
Section titled “English Wheel”There is one. It’s a Baileigh. I don’t know which model. Will try to add more later.
Slip Roller
Section titled “Slip Roller”52” Klutch
Manual
-
Klutch Slip Roller
Misc. and Consumables
Section titled “Misc. and Consumables”There is a toolchest and a cabinet within the Metal Shop to contain various equipment, supplies, consumables, and maintenance tools.
The toolchest generally contains small consumables (e.g. MIG tips, Plasma tips, Tig cups, etc.) and tools (e.g. box end wrenches, MIG pliers, etc.).
The cabinet generally contains larger supplies (e.g. spools of MIG wire, filler rod, etc.) and some smaller equipment (e.g. spot welder, welding helmets, etc.).
There are also shelves hanging on the far wall with the most often used equipment/supplies.
Migrated from the legacy DMS wiki: original page